Technical safety regulations for punching and shearing machines

Technical safety regulations for punching and cutting machines

1. Before starting the Plate Punching And Shearing Machine, check the transmission parts of the punching and shearing machine and whether the connecting screws and pin shafts of each part are loose. Whether the electrical grounding is intact.

2. Lubricate each part before work, start up and try to run for 2 to 3 minutes, no problem can be put into work.

3. Do not overload, quenching steel is strictly prohibited.

4. Work should wear gloves and wear good labor protection supplies, sandals and slippers are strictly prohibited.

5. Always add oil to the punch when punching and shearing.

6. Pay attention to the safety of the fingers when feeding, especially when the plate rushed to the end of the foot pressure plate, do not cut.

7. It is strictly prohibited to disassemble and proofread the cutting edge and die when starting the machine. Do not hit the die, cutting edge and other parts with force.

8. Strictly control the specification range of sheet metal.

9. The workplace must not be stacked with other items and a large amount of flushing, adjustment and cleaning must stop.

1 o. Work finished, timely stop, power, clean up the scene.

That's all for the sharing,and we supply Flat Steel Shearing Machine for sale, if you have any demand for our products,just feel free to contact us.